浙江超联电子有限公司

Zhejiang ChaoLian Electronics Co., Ltd
Products
你的位置:Home > Products

Product model:SL05SPP24D

    Product model:SL05SPP24D
    Description:FO Patch Panel SC type 24 Port, 19” 1U Rack Mounted, drawer style (SC/ST/FC/LC)

    APPLICATION
         The product can be used on the terminal of the optical cables,different types and structures,the diameter of which are within 20mm tray.

    STRUCTURAL FEATURES
    1.  All property indexes are in accordance with national YD/T814-1996 standard
    2.  The body make use of cold rolling steel,and the surface use the technique of dim
         plastic.strong adhesive force,artistic and durable.
    3.  Distinctive design of 4 cable enrance and fiber exit of 24 cores duplex SC
         adapters.
    4.  Cable entrance are sealed with oil resistance NBR to increase the flexibility.user 
         can choose to prick the entrance.
    5.  Overlapping fiber splice tray and separate insulation earthing unit make the
         disposition of the cores ,expanding the capacity and cable-earthen
         flexible,convinient and safe.

    MAIN TECHNICAL SPECIFICATIONS
    1.  External size: 480*300*1U
    2.  Winding radius ≥40mm
    3.  Fiber capacity: 48cores
    4.  installing: rack mounted
    5.  Working temperature:-25℃~+45℃
    6.  Atmosphere pressure:70~106Kpa
    7.  Insulated Resistance:2×10MΩ/500V(DC)

    OPERATIONS
    1.  Peel the cable , take off the outer and inner housing, as well as loose contract
         tube, and wash off the filling grease, leaving 1.1~1.6m  fiber and 20~40mm
         steel core.
    2.  Fix the cable-pressing card and the cable, as well as the cable reinforce steel
         core.
    3.  Lead the fiber into the melting and connecting tray, fix heat contract tube and 
         melted tube to one of the connecting fiber. After melting and connecting the
         fiber, move heat contract tube and melted tube and fix the stainless (or quartz)
         reinforce core stick ,make sure the connecting point is in the middle of the
         housing pipe. Heat the pipe to make the two into one.Put the protected joint into
         the fiber-laying tray.(one tray can lay 12 cores).
    4.  Lay the left fiber in the melting and connecting tray evenly, and fix the winding
         fiber with nylon ties. Use the trays from the bottom up. After all the fiber has
         been connected, cover the top layer and fix it.
    5.  Position it and use the earth wire in accordance with the project plan.
    6.  Close the cover. It can be putted on rack.

    PACKING LIST
    1.  Terminal box main body: 1 piece
    2.  Polishing sand cloth: 1 piece
    3.  Melting and connecting mark: 1 piece
    4.  Fiber housing : 2-48 pieces
    5.  Tie: 4-16  pieces

    ORDERING INFORMATION

    Product Code

    Description

    Packaging

    Carton Size

    GW

    SL05SPP24D

    FO Patch Panel SC type 24 Port, 19” 1U Rack Mounted, drawer style (SC/ST/FC/LC)

    10 PCS

    49*40*70 cm

    --