Zhejiang Chaolian Electronic Co., Ltd.
Tel: +86-574-63939781 E-mail: sales@sur-link.com
Patch Panel SPP-9562D1
Similar Products
  • Patch Cord Ftp SLU5PC242DS

    Description: Patch Cord UTP Cat.5e Snagless Yellow Ligule Molded Boot 1MMain Description Of The Product:1. Sur-link patch cords are high-performance UTP components available in broad range of lengths...

  • Cable Faceplate SFP-701101

    Description:Faceplate, Floor Type, 1 PortNOTES:1. Cover Material: Flame retardant ABS UL94V-02. BURR : 0.05mm MAX ORDERING INFORMATION:Product CodeDescriptionPackagingCarton SizeGWSFP-701101Faceplate, Floor T...

  • Magazine SLME10P-0203

    Description: 10 Pair Magazine, 2 Pole Arrester loadedFEATURE:1. Telecom module: 10 pair magazine, 3 pole arrester loaded, with fuse2. Plastic parts: ABS3. Contact pin: Phosphor bronze with silver-p...

Patch Panel SPP-9562D1

Patch Panel SPP-9562D1 Product model:

SPP-9562D1

Patch Panel SPP-9562D1 Description:

UTP Cat.5e Patch Panel, 24 Port, 45 degree, LSA& 110 Dual Use IDC


Patch Panel SPP-9562D1 Main Description of The Product:

  • 24 ports patch panel, Cat.5e UTP type. Dust free and masterly 45°incline port, protect the patch cord from bending too much. The structure of each port of this patch panel is same which makes sure that the performance of each port is consistent.
  • According to the standard of ISO/IEC 11801:2002 CLASS D and ANSI/TIA/EIA/568B.2 Cat.5e standard. T568A punching sequence and T568B punching sequence are both compatible. Fitting for horizontal distribution in the equipments room and equipments connecting.
  • Connecting: FCC port for Cat.5e UTP patch cord and IDC for horizontal distribution cables.
  • Compatibility: Compatible for UTP Cat.5e general cable distribution systems.
  • IDC: 110 type or dual use type for your choice.

Patch Panel SPP-9562D1 Technique Characteristics:

  • Entire high-carbon steel outer frame, with plastic powder cladding.
  • RJ45 jack frame material: PBT, golden plated phosphor bronze pins, Shielding shell of the RJ45 jack: Brass housing with nicket-plated; IDC clip: Tinned phosphor bronze pins.
  • Fitting for 22AWG/23AWG/24AWG cables, punching duration: 250 times. FCC ports inserting duration: 750 times.
  • Cabling sequence: T568A & B.
  • Punching tool: Standard 110 tool for 110 IDC, Standard 110 tool or LSA tool for dual IDC.
  • Testing condition of transmitting capability: 100MHz

Patch Panel SPP-9562D1 ORDERING INFORMATION:

Product Code

Description

Packaging

Carton Size

GW

SPP-9562D1

UTP Cat.5e Patch Panel, 24 Port, 45 degree, LSA& 110 Dual Use IDC

15 PCS

53*29*32 cm

12 kg

Leave a Message Email Us

we will contact you within 24 hours.