Zhejiang Chaolian Electronic Co., Ltd.
Tel: +86-574-63939781 E-mail: sales@sur-link.com
Patch Panel SPP-9962L1
Similar Products
  • Connector Fiber Optic SL01LP6203

    Product model:SL01LP6203Description:FO Connector LC Multi mode Duplex, with ClipSPECIFICATIONS:Material: zirconia (ZrO2) ferruleInsertion loss: SM<0.3dB, MM<0.5dBReturn loss: PC>45db, UPC>55dB...

  • 110 Wiring Blocks SWB-214601

    Description: Wiring Blocks, 50 Pair, without LegsELECTRICAL: 1. VOLTAGE RATING: 125 VAC RMS 2. CURRENT RATING: 1.5 AMP 3. CONTACT RESISTANCE: 100 MILLIOHMS MAX 4. INSULAT...

  • Fiber Test Equipment SL0812B02

    Product model:SL0812B02Description:Pen TYpe Visual Fault LocatorCan fast locate the break of the fiber in its range;2Hz flash or CWFull energy can support above 50 hours operation;1mW OR 10mW,Specifit...

Patch Panel SPP-9962L1

Patch Panel SPP-9962L1 Product model:

SPP-9962L1

Patch Panel SPP-9962L1 Description:

UTP Cat.6 Patch Panel, 24 Port, 45 degree, with back bar, LSA IDC


Patch Panel SPP-9962L1 Main Description of The Product:

  • 24 ports patch panel, Cat.6 UTP type. Dust free and masterly 45°incline port, protect the patch cord from bending too much. The structure of each port of this patch panel is same which makes sure that the performance of each port is consistent.
  • The cable management is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel.
  • According to the standard of ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568B.2-1 Cat.6 standard. T568A punching sequence and T568B punching sequence are both compatible. Fitting for horizontal distribution in the equipments room and equipments connecting.
  • Connecting: FCC port for Cat.6 UTP patch cord and IDC for horizontal distribution calbes.
  • Compatibility: Compatible for UTP Cat.6 or Cat.5e、Cat.5 general cable distribution systems.

Patch Panel SPP-9962L1 Technique Characteristics:

  • Entire high-carbon steel outer frame, with plastic powder cladding.
  • RJ45 jack frame material: PBT, golden plated phosphor bronze pins; Shielding shell of the RJ45 jack: Brass housing with nickel-plated. IDC clip: Tinned phosphor bronze pins.
  • Fitting for 22AWG/23AWG/24AWG cables, punching duration: 250 times. FCC ports inserting duration: 750 times.
  • Cabling sequence: T568A & B
  • Punching tools: standard LSA type or 110 type punching tool. (According to the IDC port you chose, LSA or 110 type ).
  • Testing condition of transmitting capability: 250MHz.

Patch Panel SPP-9962L1 ORDERING INFORMATION:

Product Code

Description

Packaging

Carton Size

GW

SPP-9962L1

UTP Cat.6 Patch Panel, 24 Port, 45 degree, with back bar, LSA IDC

10 PCS

55*27*27 cm

13 kg

Leave a Message Email Us

we will contact you within 24 hours.