Zhejiang Chaolian Electronic Co., Ltd.
Tel: +86-574-63939781 E-mail: sales@sur-link.com
Odf Patch Panel SL05SPP06W
Similar Products
  • Data Cable Tools SL0CT1002

    Description: RJ45 & RJ12 Dual Use Crimping ToolORDERING INFORMATION:Product CodeDescriptionPackagingCarton SizeGWSL0CT1002RJ45&RJ12 Dual Use Crimping Tool50 PCS72*18*29 cm16 kg

  • Patch Panel SPP-2992A1-2

    Description:UTP Cat.6 Patch Panel,48 portNOTES:ELECTRICAL:1. Voltage rating: 125 VAC RMS2. Current rating: 1.5 AMP3. Contact resistance: 20 Milliohms MAX4. Insulation resistance: 100 Megohms MIN @ 500...

  • Network Cabinet SL08WMC02

    Description: Double Section Wall Mounted CabinetDETAIL: The Double Section Provides An Easy Access To The Cabinet To The Rear Of All Mounted Cabinets. A Swing Frame Construction Adds To Th...

Odf Patch Panel SL05SPP06W

Odf Patch Panel SL05SPP06W Product model:

SL05SPP06W


Odf Patch Panel SL05SPP06W Description:

FO Terminal Box, Wall Mounted, 6Port or 12 Port, SC/FC/ST/LC type Port available

Odf Patch Panel SL05SPP06W APPLICATION:
The product can be used on the terminal of the optical cables, different types, and structures, the diameter of which are within 18mm tray.

Odf Patch Panel SL05SPP06W STRUCTURAL FEATURES:
1.   All property indexes are in accordance with National YD/T814-1996 Standard.
2.   The body makes use of cold rolling steel, and the surface use the technique of dim
blowing plastic. Strong adhesive force, artistic and durable.
3.   Distinctive design of 1-2 cable entrance and fiber exit of 1-48 cores assures
flexibility.
4.   Cable entrance and fiber exit are sealed with oil resistance NBR to increase the
flexibility. Users can choose to prick the entrance and exit.
5.   Overlapping fiber-melting tray and separate insulation earth unit make the
disposition of the cores, expanding the capacity and cable-earthen flexible,
convenient and safe.

Odf Patch Panel SL05SPP06W MAIN TECHNICAL SPECIFICATIONS:
1.  External Size: (length×width×height) 330×183×70
2.  Weight:1.7kg
3.  Optical fiber winding radius: ≥40mm
4.  Extra loss of fiber tray:none
5.  Fiber length left in tray:≥1.6m
6.  Fiber capacity: 48 cores
7.  Working temperature: - 400C ~ + 600C
8.  Lateral pressure-resistance: 500N
9.  Shock-resistance:750N

Odf Patch Panel SL05SPP06W OPERATIONS:
1.  Peel the cable, take off the outer and inner housing, as well as loose contract tube, and wash off the filling grease, leaving 1.1~1.6m  fiber and 20~40mm steel core.
2.  Fix the cable-pressing card and the cable, as well as the cable, reinforced steel core.
3.  Lead the fiber into the melting and connecting tray, fix heat contract tube and melted tube to one of the connecting fiber. After melting and connecting the fiber, move heat contract tube and melted tube and fix the stainless (or quartz) reinforce core stick, make sure the connecting point is in the middle of the housing pipe. Heat the pipe to make the two into one.Put the protected joint into the fiber-laying tray.(one tray can lay 12 cores)
4.  Lay the left fiber in the melting and connecting tray evenly, and fix the winding fiber with nylon ties. Use the trays from the bottom up. After all the fiber has been connected, cover the top layer and fix it.
5.  Position it and use the earth wire in accordance with the project plan.
6.  Close the cover. It can be installed on the wall or in horizontal line.

Odf Patch Panel SL05SPP06W PACKING LIST:
1.  Terminal case main body: 1 piece of PVC
2.  Polishing sand cloth: 1 pc
3.  Melting and connecting mark: 1 pc
4.  Fiber housing: 2~48 pcs
5.  Tie: 4~16 pcs

Odf Patch Panel SL05SPP06W ORDERING INFORMATION:

Product Code

Description

Packaging

Carton Size

GW

SL05SPP06W

FO Terminal Box, Wall Mounted, 6Port or 12 Port, SC/FC/ST/LC type Port available

10 PCS

49*40*70 cm

--

Leave a Message Email Us

we will contact you within 24 hours.