Fiber Optic Splicers SL05FSEV7202 Product model:
Fiber Optic Splicers SL05FSEV7202 Description:
Waterproof Dome Fiber Optical Splice Closure, Joint Box
aerial, direct-burying, wall-mounting, Pipeline laying way
external dimensions: 510mm×210mm (Erect type)
3kg (Erect type)
Cables Entry & Exit:
Cable Diameter (mm):
Max Capacity of Core:
Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS.
-40℃ to +85℃
The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.
After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation.
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cables.
Suitable for single core fiber optic cable and ribbon fiber optic cable.
Fiber Optic Splicers SL05FSEV7202V ORDERING INFORMATION:
Fiber Splicing Enclosure Vertical type ¨3 IN-3 OUT 72 Fibers