Zhejiang Chaolian Electronic Co., Ltd.
Tel: +86-574-63939781 E-mail: sales@sur-link.com
Optical Fiber Components SL0632SLCSM20
Similar Products
  • Patch Cord Ftp SLF5PC242AS

    Description: Patch Cord FTP Cat.5e Grey color 1M Plain molded bootMain Description Of The Product:1. Sur-link patch cords are high-performance FTP components available in broad range of lengths and e...

  • Connector Fiber Optic SL01SP9104

    Product model:SL01SP9104Description:FO Connector SC type Single mode, SimplexSPECIFICATIONS:Insertion loss: SM<0.3dB, MM<0.5dBReturn loss: PC>45db, UPC>55dB,APC>65dBService life: >1000 t...

  • Corning Fiber Tools SL1001AA01

    Description: Armoured Cable SlitterThe Armoured Cable Slitter helps you break out fiber cables which are housed in corrugated copper, steel or aluminum armor sheaths. The tool slits the outer polyethy...

Optical Fiber Components SL0632SLCSM20

Optical Fiber Components SL0632SLCSM20 Product model:

SL0632SLCSM20


Optical Fiber Components SL0632SLCSM20 Description:

SFP

1.25Gbps  Single Fiber BIDI SFP Transceiver
  • SFP package with LC/SC connector
  • 1310nm FP Tx/1550nm PIN Rx and 1550nm DFB TX/1310nm PIN RX
  • 10Km~20Km transmission with SMF
  • +3.3V single power supply
  • LVPECL compatible data input/output interface
  • Low EMI and excellent ESD protection
  • laser safety standard IEC-60825 compliant
  • Compatible with RoHS
Optical Fiber Components SL0632SLCSM20 Application
Ethernet
Telecom

Optical Fiber Components SL0632SLCSM20 Description:
The SFP transceiver supports dual data-rate of 1250MGbps and from 10km to 20km transmission distance with SMF.
The transceiver consists of two sections: The transmitter section incorporates an FP laser. The receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA).
All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable.  Tx Fault indicates that degradation of the laser. Loss of signal (LOS) output indicates the loss of an input optical signal of the receiver.
The standard serial ID information compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial bus. For more information, please refer to SFP Multi-Source Agreement (MSA)

Optical Fiber Components SL0632SLCSM20 Performance specifications:
Optical Fiber Components SL0632SLCSM20 Absolute Maximum Ratings

Parameter

Symbol

Minimum

Maximum

Units

Storage Temperature

Tst

-40

+85

°C

Operating Temperature

Top

0

+70

°C

Supply Voltage

Vcc

0

+3.6

V

Input voltage

Vin

GND

Vcc


Lead Soldering

Temperature & Time

240/10

°C/s

Leave a Message Email Us

we will contact you within 24 hours.